Poop... Will it be up by the end of the day?roodlesnouter wrote: , sortedthe track is not sorted yet, I'm sure it will be but I'm say Bette watching them. It has been bolted in since yesterday but it still not married up. They are up and down on that cherry picker adjusting posts but it still ain't right.Hari wrote: Well I'm glad that they have sorted the track out... ly started to worry me as im going on the 26th-27th May, anyone know if ittl be open?
The Smiler - Construction Discussion
- Hari
- Member
- Posts: 132
- Joined: Mon May 24, 2010 7:21 pm
- Location: Under the Marmaliser (A.K.A - Hertfordshire!)
NR
- youarecorrectsir
- New Member
- Posts: 15
- Joined: Wed Feb 27, 2013 5:25 pm
- Location: Bristol
Good news about that piece that wouldnt fit! As an engineer, it does my heart good to see steel behaving the way it should be.
Anywho, now that THAT issue has been sorted, back to the fins... NOT
Anywho, now that THAT issue has been sorted, back to the fins... NOT
[align=center]"Everybody dies, but not everybody lives"[/align]
- vinyljunkie
- New Member
- Posts: 17
- Joined: Wed Aug 08, 2012 10:05 pm
I can't wait to see the hypnotiser leg and the station! It's gonna be immense \:D/
Last edited by vinyljunkie on Sun Apr 21, 2013 12:41 pm, edited 1 time in total.
- TomL
- Member
- Posts: 247
- Joined: Fri Nov 09, 2012 4:39 pm
- Location: Wirral
- Contact:
@roodlesnouter: Ready for lifting
Sponsor a scream, enthusiast fundraising in aid of Merlin's Magic Wand, Click Here to donate! | Twitter | Facebook Click on the banners above to visit our pages.
- TomL
- Member
- Posts: 247
- Joined: Fri Nov 09, 2012 4:39 pm
- Location: Wirral
- Contact:
The leg wont effect the construction of the inverted drop and the lift hill however the drop and lift wouldeffect the legA wrote: Surprised to see the final marmaliser leg going in when the first lift hill and one of the inverted drops are not yet complete
Sponsor a scream, enthusiast fundraising in aid of Merlin's Magic Wand, Click Here to donate! | Twitter | Facebook Click on the banners above to visit our pages.
- dylan.tempelaars
- New Member
- Posts: 23
- Joined: Sat Feb 16, 2013 1:47 pm
- Location: you shall never know!
same here :/ but maybe there not wasting time and getting the leg finished because theres no more track to be put up (no more deliverd track?) idk really but it seems like they might be doing the inverted drop fault firstA wrote: Would have thought it would be left until last :/
some people call me insane, you are right!
- MatthewR1990
- Member
- Posts: 183
- Joined: Thu May 03, 2012 10:38 pm
- Location: West Bromwich
I do believe that anything that interacts with the track needs to b built before testing can take place to make sure there is adequate clearance. So the hypnotiser leg needed to be built ASAP as theoretically it is part of the track.A wrote: Would have thought it would be left until last :/
West Bromwich Albion until I die! I bleed blue and white.
- dylan.tempelaars
- New Member
- Posts: 23
- Joined: Sat Feb 16, 2013 1:47 pm
- Location: you shall never know!
what appears to be a lego brick (in red)
like this: (the yellow ones)
like this: (the yellow ones)
Last edited by dylan.tempelaars on Sun Apr 21, 2013 1:41 pm, edited 1 time in total.
some people call me insane, you are right!
- Roodlesnouter
- Member
- Posts: 363
- Joined: Thu Feb 23, 2012 9:17 pm
- Location: Wishing I was in Orlando
- Contact:
Still working on that rogue track piece, they have spent best part of a day on it now.
http://pixelsattheparks/" onclick="window.open(this.href);return false;
- SwEDEN
- Member
- Posts: 239
- Joined: Tue Apr 10, 2012 7:05 pm
- Location: Somewhere over the rainbow!
I believe that once the leg gets lifted into place in terms of the actual framework of the legs that leg will be finished, but more disks will be added on later of course.....danny.g97 wrote:So when this is up the hypnotiser is finished other than theming obviously??Danny wrote: From Roodles, you can see one of the spinning disks attached to the leg:
What is happening about the first lift hill today, do you think we will see it finished today, or is the bulk of the work on site today focused on the marmaliser?
- Ar128
- New Member
- Posts: 6
- Joined: Sat Jan 26, 2013 11:12 pm
- Location: Colchester
I'd imagine roodles because he's on parkdanny.g97 wrote: Sorry but some people are saying that the 1st drop has been completed now and screwed together but roodles is still saying their still working on it, who is right?!
Smile!!
The first lift hill will be the last piece to be completed, as it will block access to the site otherwise. Therefore, they will sort the inverted drops out, and then install the remaining pieces of lift hill.SwEDEN wrote: What is happening about the first lift hill today, do you think we will see it finished today, or is the bulk of the work on site today focused on the marmaliser?